Apply the Bowditch rule with a correction ledger
Distribute a 0.100 m loop gap by observed course length, then prove the corrections bring both coordinate sums to zero.
ΔN +0.060 m · ΔE +0.080 m · linear gap 0.100 mOn this page
Save a copy of the unadjusted resultAllocate a share of each signed totalWalk the adjusted coordinatesDecide whether the adjustment is appropriateA 100 mm discrepancy does not mean subtracting 100 mm from the longest line. The Bowditch rule distributes a signed correction in each coordinate axis to every course, in proportion to its share of the measured perimeter. The corrections change the course components. Their magnitudes and directions need not match a correction to the measured distance alone.
Save a copy of the unadjusted result
Work through a synthetic loop in metres. From A go north 100.060, east 70.080, south 100.000 and west 70.000. Its perimeter is 340.140 m. The signed component sums are +0.060 m north and +0.080 m east. The computed return therefore lies northeast of A and the linear misclosure is 0.100 m.
The correction required across all courses is −0.060 m north and −0.080 m east. You can check the raw result in the straight-course calculator. Carry out the adjustment in a worksheet so you can retain each original observation alongside its correction.
Allocate a share of each signed total
For a course of length L and perimeter P, multiply −0.060 by L/P to get its northing correction. Multiply −0.080 by that same fraction for its easting correction. The longest side takes a slightly larger share of each axis. Keep enough digits internally that the displayed thousandths do not drive the calculation.
| Course | Length m | North correction m | East correction m |
|---|---|---|---|
| A–B | 100.060 | −0.017650 | −0.023534 |
| B–C | 70.080 | −0.012362 | −0.016483 |
| C–D | 100.000 | −0.017640 | −0.023520 |
| D–A | 70.000 | −0.012348 | −0.016464 |
The first adjusted displacement is approximately +100.042350 m north, −0.023534 m east. Its original direction was due north. The adjustment gives it a small westward component because every course shares in recovering the easterly endpoint discrepancy. A spreadsheet that applies corrections only to the axis represented by the original bearing implements a different rule.
Walk the adjusted coordinates
Give A an arbitrary starting coordinate of N 500.000, E 800.000. Apply the adjusted displacement of A–B to reach approximately N 600.042350, E 799.976466. For B–C add the northing correction to the original north displacement of zero. Add the easting correction to the original east displacement of +70.080. Keep adding the adjusted components until the last computed coordinate returns to the fixed A.
Two independent arithmetic checks should appear below the worksheet. The four fractions L/P sum to one. Separately, the four adjusted north components sum to zero and the four adjusted east components sum to zero. Checking only the linear gap hides the sign information that would help you find a faulty formula.
Decide whether the adjustment is appropriate
The rule assumes a distribution policy. It makes no observation more reliable and it does not establish which course caused an error. Use the project instructions to determine the permitted adjustment and required precision. A blunder in the station order, a missed north correction, or a wrong terminal coordinate can be concealed by a set of adjusted coordinates that closes perfectly.
If an independent tie to C exists, compare it with the adjusted C as a separate check. Adding that tie as another course in the loop changes the geometry and the length weights. For a network with multiple controls and observations of materially different precision, fit the approved network model instead of treating every available observation as one long circuit.
A review copy should carry the unadjusted component totals, reasons for accepting the observations, adopted method, correction ledger and resulting coordinates. The reviewer can then answer two different questions from the same record: how well the field observations agreed and how you assigned the remaining discrepancy.