How to check a traverse between two known control points
Subtract the published control-to-control displacement before computing link-traverse misclosure. A 600 m example catches a common false failure.
Known control displacement · +300 m north · +280 m eastOn this page
Establish what the observations should add up toCompute the answer a second wayUse the browser plot as a visual aidCheck the controls before adjusting the traverseThe end of a good link traverse may be hundreds of metres from its start. A loop calculator will faithfully report those hundreds of metres if you ask it to close on the first point. For a traverse that runs from control A to a different control B, the useful question is how far the computed endpoint misses B.
Establish what the observations should add up to
Use these training coordinates in one projected system and one horizontal unit. A is N 2000.000 m, E 1000.000 m. B is N 2300.000 m, E 1280.000 m. Subtract A from B. The intended travel is +300.000 m north and +280.000 m east. Its straight-line length is about 410.366 m. That length describes the chord between the marks, regardless of the path taken.
Suppose three observed legs run north 310.060 m, east 280.080 m, then south 10.000 m. The measured route totals 600.140 m. Its summed displacement is +300.060 m north and +280.080 m east. Adding those sums to A produces a computed terminal coordinate of N 2300.060 m, E 1280.080 m.
| Check | Northing component | Easting component |
|---|---|---|
| Observed displacement | +300.060 | +280.080 |
| Required displacement | +300.000 | +280.000 |
| Observed minus required | +0.060 | +0.080 |
The remaining 60 mm north and 80 mm east make a 0.100 m gap. Relative to the observed travel the denominator is 600.140 / 0.100 = 6,001.4. The straight distance between A and B is not the traverse length. Using it for that ratio would change the reported quantity.
Compute the answer a second way
Start at the published B coordinate and work backward through the three observations in reverse order and direction. Travel north 10.000 m, west 280.080 m, then south 310.060 m. You arrive at N 1999.940 m, E 999.920 m. That position misses A by −0.060 m north and −0.080 m east. The magnitude agrees and the signs reverse, as they should when the entire route is reversed.
The backward check helps expose a spreadsheet that subtracts the wrong starting coordinate twice, or adds the published displacement instead of subtracting it. It will reproduce a shared mistake in the original observations, so keep station IDs and independent control descriptions available during review.
Use the browser plot as a visual aid
The Traverse Desk calculator expects a loop. To see this link as a nearly closed figure, you can append a constructed B-to-A return leg to a working copy. Its components must be exactly −300.000 m north and −280.000 m east within the precision you enter. Treat that closing construction as known geometry. Record it separately from the three observed legs.
The resulting gap should approach 0.100 m as you carry enough digits in the constructed direction and distance. The displayed perimeter will include the synthetic return leg. For the link-traverse precision ratio, use the original 600.140 m of observation. A copied report that includes the artificial leg would make the ratio look better without adding any field information.
Check the controls before adjusting the traverse
A control coordinate may have been supplied on a different zone, datum, epoch, unit, or site localization. First reconcile the identifiers and coordinate reference with the control record. Write down whether the measurements are grid or ground distances and whether they require reduction to match the control. When terminal orientation was also observed, compute the terminal angular discrepancy as a separate check. Matching the position at B does not prove the final orientation is correct.
Keep the measured endpoint, known endpoint and signed residual in your deliverable. Another surveyor can then reconstruct the result even if their software calls the oppositely directed correction the misclosure vector.