Traverse DeskGet COGO
Closure diagnosis

Spot a reversed course in a traverse closure check

Reversing one course changes the loop residual by twice that course’s length. A 30 m example shows how to test that clue against the field book.

Worked exampleOne reversed 30 m course changes the residual vector by 60 m
On this pageRun a loop you can check mentallyReverse only the last observationGo back to the observation

Run a loop you can check mentally

Enter the following four azimuth and distance pairs on separate lines: 0,40 then 90,30 then 180,40 then 270,30. Choose metres. The north and south legs cancel, as do the east and west legs. At calculation precision the endpoint is the starting point.

Reverse only the last observation

Replace the last pair with 90,30. The final leg now runs 30 m east instead of 30 m west. The endpoint is 60 m east of the start. Perimeter stays 140 m. The error grew by 60 m because one 30 m west component was removed and one 30 m east component was added.

On a real loop with an existing residual, the change is a vector. Compare the north and east components, since the scalar misclosure need not change by exactly twice the length.

Go back to the observation

Look for a foresight entered as a backsight or a line transcribed in reverse station order. In quadrant notation the reverse of N 25° E is S 25° W. Match the station names and verify the observation before changing it. Other combinations of errors can produce the same closing vector.

References

Check traverses offline with COGO