Check parcel area with translated coordinates and cross-products
Calculate the area of an irregular four-corner figure near large grid coordinates and verify it by splitting the shape into triangles.
Local origin · E 600,000 m · N 4,500,000 mOn this page
Move the vertices to a convenient originVerify the number using diagonal ACDiagnose an unexpected area before rounding itDescribe the basis of the resultAn area workbook multiplies grid eastings near 600,000 m by northings near 4,500,000 m to obtain an area of only a few hundred square metres. Subtracting a nearby origin makes the arithmetic much easier to inspect. Translation changes the coordinate labels but leaves side lengths and area intact.
Move the vertices to a convenient origin
Assume four points arrive in boundary order. Subtract E 600000 and N 4500000 from each point. Use x for local easting and y for local northing. This example is a closed straight-sided plan figure in one projected coordinate system.
| Corner | Grid E | Grid N | Local x | Local y |
|---|---|---|---|---|
| A | 600000 | 4500000 | 0 | 0 |
| B | 600030 | 4500000 | 30 | 0 |
| C | 600040 | 4500020 | 40 | 20 |
| D | 600010 | 4500030 | 10 | 30 |
Take the cross-product contribution from each consecutive pair as xᵢyⱼ − xⱼyᵢ. Include D back to A exactly once. A–B contributes zero, B–C contributes 30 × 20 − 40 × 0 = 600, C–D contributes 40 × 30 − 10 × 20 = 1000, and D–A contributes zero. Half the sum is 800 m². With easting as x and northing as y, the positive value indicates counterclockwise ordering.
Verify the number using diagonal AC
Joining A to C splits this convex figure into two triangles. Triangle ABC has a horizontal base AB of 30 m and a perpendicular height of 20 m, giving 300 m². For triangle ACD, use the vectors from A to C and D. The absolute cross product is |40 × 30 − 20 × 10| = 1000, giving 500 m². Together the triangles reproduce 800 m².
There is a more visual third check. The enclosing local rectangle is 40 m wide by 30 m high, or 1200 m². The outside pieces on the left, upper right and lower right have areas of 150, 200 and 50 m² respectively. Subtract the total of 400 to recover the same 800. A rough enclosing rectangle is often enough to catch a missing factor of two.
Diagnose an unexpected area before rounding it
Reversing the vertex order reverses the signed sum while preserving the magnitude. Swapping northing and easting everywhere also flips orientation. Neither test proves that the boundary was sequenced correctly. A bow-tie traversal can cross itself and cancel signed portions of the area while still returning exactly to its starting point. Plot the numbered corners in their travel order.
A file of points sorted by point ID, collection time or elevation may follow a different sequence from the legal or design perimeter. Return to the figure definition or the documented adjacency before computing the area. A hole requires a separate ring and its specified treatment. Repeating the first coordinate as a final row is harmless if the code manages closure consistently, since the zero-length extra edge contributes zero.
Describe the basis of the result
This computation gives an area on the given coordinate plane. Grid and ground areas can differ. Where a single ground-to-grid distance factor is appropriate throughout a small site, the corresponding area ratio uses the square of that factor. Follow the adopted project basis for any reported conversion.
The traverse plot can help you inspect the order of straight-course calls. It does not certify the legal boundary or replace an independent coordinate-area worksheet. Keep the source coordinate list, ring order, chosen axis convention and unit with the result. If arcs form part of the perimeter, account for their circular segments as well. An endpoint-only coordinate list describes the chord polygon.
A useful unit check on the translated figure is to convert the result once at the end. The 800 m² area equals 0.080 ha. Converting each coordinate increment to another unit first is also valid if done consistently, but remember that an area factor is a squared length factor. A single linear conversion multiplier would give the wrong area.