Traverse DeskGet COGO
Coordinate geometry

Recover a missing bearing and distance from coordinate sums

Calculate the unique closing displacement for one unidentified straight course and test whether the surviving record supports that reconstruction.

Worked exampleKnown travel +24 m north, +70 m east · closing line goes southwest
On this pageKeep the order of the known coursesTest the solution using coordinates instead of sumsIdentify the assumptions hiding inside the solutionPreserve the difference between computed and observed

A deed sketch shows four sides. One direction and distance have become illegible, but the other three straight displacements are known. In a single planar closed figure, the missing side must cancel the vector sum of the known sides. That gives a testable reconstruction. It does not turn a computed answer into an observed boundary call.

Keep the order of the known courses

For the training problem, start at A, go north 48 m to B, east 70 m to C, then south 24 m to D. The last straight line from D to A is missing. The first three displacements sum to +24 m north and +70 m east. Relative to A, D lies northeast. To return from D to A the missing side must therefore run −24 m north and −70 m east.

Its length is √(24² + 70²) = √5476 = 74 m. For the quadrant bearing, measure the acute angle away from south toward west. Arctan(70/24) gives approximately 71.0754°. The reconstructed bearing is S 71.0754° W, equivalent to azimuth 251.0754°. A quick check is to compare the component magnitudes. The west displacement is much larger than the south displacement, so the line must point closer to west than to south.

Test the solution using coordinates instead of sums

Give A coordinates N 3200, E 1400 m. B becomes N 3248, E 1400. C becomes N 3248, E 1470. D is N 3224, E 1470. Subtract D from A directly and obtain the same −24 and −70 m. The 74 m result is the inverse between two endpoints already determined by the other calls. Rounding the reconstructed angle to a tenth of a degree would shift the final position. Retain unrounded values until the comparison with record precision is complete.

Reconstruction check Expected result
Terminal point after known courses N 3224, E 1470
Missing length 74.000 m
Bearing quadrant Southwest
Final point after reconstructed course Approximately N 3200, E 1400

Enter the four absolute azimuths and lengths in the loop calculator, carrying several decimals for the final azimuth. A tiny numerical remainder can reflect the rounded direction you typed. If you get a gap of nearly 148 m instead, you likely added the A-to-D vector in place of the required D-to-A vector.

Identify the assumptions hiding inside the solution

The condition supplies two scalar equations, one for northing and one for easting. One completely missing straight vector also has two unknown components, so the geometric problem is determined. Two completely missing sides bring four unknown components. Countless pairs can share the same combined displacement. Additional bearings, distances, intersections or monument evidence would be needed to distinguish them.

A missing curved course presents a different ambiguity. The endpoint vector is still recoverable, but many arcs can connect those endpoints. Their radii, lengths and enclosed segments differ. Calling the recovered chord the missing arc would introduce an unsupported assumption.

Preserve the difference between computed and observed

Label the fourth course as inferred from the other three under the closure assumption. If a later document gives D–A as 73.94 m or on a slightly different bearing, compare that new observation with the reconstruction. Do not overwrite it to keep the figure pretty. The discrepancy now provides independent information that the originally forced closure lacked.

For an office check, save the known input, recovered signed components, the inverse calculation, and the course as written in the source record with its missing fields marked. Anyone reviewing the work can then tell which measurements test the result and which were derived solely to complete the geometry.

Where a station number has also gone missing, verify the order of the known displacements. Their final vector sum can stay the same after reordering while the intervening corners occupy different places.

References

Check traverses offline with COGO